View VBN2A1815PT39_514831.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Interconnect Technologies & Solutions for the Transportation Industry
For over 90 years, ITT has been developing innovative solutions for harsh environment applications. We have a proven track record of demonstrating our expertise and commitment to the transportation industry, offering the broadest portfolio of interconnect products.
Off-Road / Heavy Vehicle
Our interconnect range include sealed circulars, plastic and metal shell bayonet coupling circulars, miniature metal shell circulars, PC board header connectors and sensor and direct device connectors. ITT is also a systems supplier, providing value-added module and harness assemblies. In addition to our VBN series, we also offer these connectivity solutions:
Cannon APD In-line and bulkhead sensors resistant to harsh environmental conditions (contaminants, vibration and shock).
Cannon CA-Bayonet Signal and power connectors with exceptional sealing against the ingress of fluids and will withstand the effects of high vibrations.
Cannon Trident Versatile range of electrical connectors based on a standard contact design. Options include; industrial grade, harsh environment and shielded circulars.
The ITT "Engineered Blocks" symbol and the composite ITT Iogo are registered trademarks of ITT Industries. (c) 2005
VEAM VBN
Table of Contents
General Specifications & Performance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Part Number Generation & Explanation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5-6 Receptacle Connector Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7-8 Plug Connector Classes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-10 Electrical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11 Insert Arrangements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12-13 Pin & Socket Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14-15 Installation Tooling Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16-17, 42-43 Maximum Panel Thickness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18 Receptacle / Plug Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19-23 Inserts / Grommet / Backshell Option Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .from 24 to 31 Panel Sealing Gaskets / Metal Dust Caps / Cable Clamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32-41 Plastic Dummy Male Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37 VBN "290" Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41 Product Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Veam VBN Series is completely intermateable with VG95234/CIR reverse bayonet connectors.
Product Features
1/3 turn bayonet coupling
Customer Benefits
Fast reliable mating and unmating Vibration resistant No threads to gall or bind 2,000 coupling cycles max - 500 min. Flame retardant Ease of contact insertion & extraction Allows for field polarization changes Environmental sealing when mated Improved electrical creepage distance High strength / light weight Highly corrosion resistant Flexibility with different types of cables
UL94V-0 thermoplastic insert
Removable insert retaining ring Pin insert interfacial seal
Aluminum shells Protective platings Backshell / strain reliefs
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
3
VEAM VBN
General Specifications
Material Construction
Shells & Coupling Ring Finish Insulator Insulator Retaining Ring Interfacial Seal & Grommet Contacts Aluminum alloy Cadmium free plating, conductive and non-conductive Thermoplastic, UL94-V0 meets NF F 16-101 / 16-102 standards Copper alloy Fire resistant silicone rubber Copper alloy with gold or silver plating
Electrical Performance
Insulation Resistance Withstanding Voltage Contact Current Rating 5000 M 3250 VAC RMS in mated condition Contact Size AWG Max Rated Current at 20C* Rated at 85C* 13A 23A 46A
16 22A 12 41A 8 73A * single contact in isolation
Environmental Performance
Operating Temperature Flame Retardant Rating Corrosion Resistance Water Protection Fluid Resistance -40C to +100C per NF F 61-030 -40C to +125C (consult factory) UL94-V0 per NF F 16-101/16-102 96 hours per NF F 61-030 and VG95234 500 hours (consult factory) IP67 in a mated condition when used with wire sealing grommet and sealing type backshell Gas, oil, mineral oil, acid bath per NF F 61-030
Mechanical Performance
Durability Bayonet Coupling Torque Shock Vibration Contact Retention 2000 mating cycles maximum Per VG95234 Acceleration = 50g Duration = 11 ms per NF F 61-030 (NF C 20-727, NF C 93-400) Acceleration = 2g (NF F 60-002 / NF C 93-400) 20g (VG95234) Sinususoidal vibration = 10 / 100 Hz 16 contact size = 70 N minimum 12 contact size = 90 N minimum 8 contact size = 110 N minimum
Dimensions shown in mm Specifications and dimensions subject to change
4
www.ittcannon.com
VEAM VBN
ORDER CODE
VBN
3
()
20
15
P
N TXX ()
Connector Series VBN VEAM Bayonet Coupling N Series VBNG* Plug Connector Type 2 Front Mounting Receptacle 3 Rear Mounting Receptacle 38 90 Rear Mount Receptacle 6 Straight Plug Connector 8 90 Plug Connector Connector Class A, R Straight or Right Angle, no Strain relief AF, F, CF, CFZ Straight or Right Angle with Strain relief APG, RPG Straight for use with PG fitting SS Backshells for shielded cable Shell Size 16S, 18, 20, 22, 24, 28, 32, 36, 40 Insert Arrangement Refer to pages 13 and 14
Contact Gender P Male Contacts (Pin) S Female Contacts (Sockets) Insert Orientation N Normal Degrees for alternate positions - refer to page 13 and 14 W, X, Y, Z No Letter Insulator Not Installed Shell Plating TXX
T100 zinc/cobalt ecogreen (Conductive) T108 zinc/iron ecoblack (Conductive) T39 Black varnish (non conductive)
Modification Code Consult Factory * To be used only with Connector Type "6" and Connector Class "SS".
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
5
VEAM VBN
PANEL MOUNTED CONNECTOR
Crimp contacts
Receptacle shell Wire seal grommet Insert retaining ring Hard thermoplastic insert Interfacial seal gasket
PLUG CONNECTOR
Crimp contacts
Wire seal grommet
Insert retaining ring
Hard thermoplastic insert
Free shell assembly
Dimensions shown in mm Specifications and dimensions subject to change
6
www.ittcannon.com
VEAM VBN
Receptacle connector classes
L
VBN3A VBN3R SIZE L max.
Straight backshell without accessories Same as "A" but includes a wire sealing grommet
16S 80 18 100 20 100 22 100 24 105 28 105 32 115 36 125 40 125
L
VBN3RV
Short backshell, includes a wire sealing grommet
SIZE L max.
16S 55
18 65
20 70
22 70
24 70
28 75
32 75
36 80
40 80
L
VBN3APG VBN3RPG
PG thread
Straight backshell with "PG" thread and without accessories Same as "APG" but includes a wire sealing grommet 16S 80 PG9 18 100 PG16 20 100 PG16 22 100 PG16 24 105 PG21 28 105 PG21 32 115 PG36 36 125 PG36 40 125 PG42
SIZE L max. OA
L
OA
VBN3AM VBN3RM
Metric thread
Straight backshell with with metric thread and without accessories Same as "AM" but includes a wire sealing grommet 16S 80 M16 18 100 M25 20 100 M25 22 100 M25 24 105 M32 28 105 M32 32 115 M40 36 125 M40 40 125 M63
SIZE L max. OA
L
OA
VBN3CF VBN3CFZ SIZE
OA
Straight backshell with "C" style clamp Same as "CF" but includes a wire sealing grommet 16S 110 8-13.5 18 135 20 135 22 135 24 140 28 140 32 160 36 175 40 175
L OA
9.6-15.8 11.3-19
11.3-19 15.5-23.8 15.5-23.8 23.4-31.7 23.4-35 29.9-41.2
L
VBN3AF VBN3F SIZE
OA
Straight backshell with "A" style clamp Same as "AF" but includes a wire sealing grommet 16S 105 11.0 18 125 14.2 20 125 15.8 22 125 15.8 24 130 19 28 130 19 32 145 23.8 36 155 31.7 40 167 34.9
L OA
L
VBN3SS VBN3RSS SIZE L approx.
Straight backshell with shielding system Same as "SS" but includes a wire sealing grommet 16S 105 18 125 20 130 22 145 24 155 28 160 32 170 36 185 40 200
Due to the various available options, the above dimensions could vary. Please consult factory.
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
7
VEAM VBN
Receptacle connector classes
VBN38A VBN38R
SIZE L max. L1 max.
L1
L
90 degree backshell without accessories Same as "A" but includes a wire sealing grommet
16S 63 30 18 75 35 20 80 35 22 80 35 24 80 40 28 80 40 32 85 45 36 90 50 40 95 55
L
VBN38CF 90 degree backshell with "C" style clamp VBN38CFZ Same as "CF" but includes a wire sealing grommet
SIZE L max. L1 max. OA 16S 63 61 8-13.5 18 75 68 20 80 68 22 80 68 24 80 76 28 80 76 32 85 97 36 90 98 40 95 103
9.6-15.8 11.3-19
11.3-19 15.5-23.8 15.5-23.8 23.4-31.7 23.4-35 29.9-41.2
OA
L
VBN38AF VBN38F
SIZE L max.
L1
90 degree backshell with "A" style clamp Same as "AF" but includes a wire sealing grommet
16S 63 45 18 75 53 14.2 20 80 53 15.8 22 80 53 15.8 24 80 58 19 28 80 58 19 32 85 66 23.8 36 90 69 31.7 40 95 95 34.9
L1 max. OA
OA
11.0
L
VBN38APG-PGOXX VBN38RPG-PGOXX VBN38AM-MXXF VBN38RM-MXXF
SIZE L max. 16S 63 18 75
90 degree backshell with adapter with PG or Metric thread
20 80
22 80
24 80
28 80
32 85
36 90
40 95
Adapter
Dimensions shown in mm Specifications and dimensions subject to change
8
www.ittcannon.com
VEAM VBN
Plug connector classes
L
VBN6A VBN6R SIZE L max.
Straight backshell without accessories Same as "A" but includes a wire sealing grommet 16S 80 18 100 20 100 22 100 24 105 28 105 32 115 36 125 40 125
L
VBN6RV
Short backshell, includes a wire sealing grommet
SIZE L max.
16S 55
18 65
20 70
22 70
24 70
28 75
32 75
36 80
40 80
L
VBN6APG VBN6RPG SIZE
PG thread OA
Straight backshell with PC thread and without accessories Same as "APG" but includes a wire sealing grommet 16S 80 PG9 18 100 PG16 20 100 PG16 22 100 PG16 24 105 PG21 28 105 PG21 32 115 PG36 36 125 PG36 40 125 PG42
L max. OA
L
VBN6AM VBN6RM
Metric thread
Straight backshell with metric thread and without accessories Same as "AM" but includes a wire sealing grommet 16S 80 M16 18 100 M25 20 100 M25 22 100 M25 24 105 M32 28 105 M32 32 115 M40 36 125 M40 40 125 M63
SIZE L max. OA
L
OA
VBN6CF VBN6CFZ SIZE
OA
Straight backshell with "C" style cable clamp Same as "CF" but includes a wire sealing grommet 16S 110 8-13.5 18 135 20 135 22 135 24 140 28 140 32 160 36 175 40 175
L max. OA
L
9.6-15.8 11.3-19
11.3-19 15.5-23.8 15.5-23.8 23.4-31.7 23.4-35 29.9-41.2
VBN6AF VBN6F SIZE
OA
Straight backshell with "A" style clamp Same as "AF" but includes a wire sealing grommet 16S 105 11.0 18 125 14.2 20 125 15.8 22 125 15.8 24 130 19 28 130 19 32 145 23.8 36 155 31.7 40 167 34.9
L max. OA
L
VBN6SS VBN6RSS SIZE L max. 16S 105
Straight backshell with shielding system Same as "SS" but includes a wire sealing grommet 18 125 20 130 22 145 24 155 28 160 32 170 36 185 40 200
Due to the various available options, the above dimensions could vary. Please consult factory.
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
9
VEAM VBN
Plug connector classes
L
VBN8A VBN8R
SIZE L max.
L1
90 degree backshell without accessories Same as "A" but includes a wire sealing grommet
16S 63 30 18 75 35 20 80 35 22 80 35 24 80 40 28 80 40 32 85 45 36 90 50 40 95 55
L1 max.
L
VBN8CF VBN8CFZ
SIZE L max.
L1
90 degree backshell with "C" style clamp Same as "CF" but includes a wire sealing grommet
16S 63 61 18 75 68 20 80 68 22 80 68 24 80 76 28 80 76 32 85 97 36 90 98 40 95 103
L1 max. OA
8-13.5
9.6-15.8 11.3-19
11.3-19 15.5-23.8 15.5-23.8 23.4-31.7 23.4-35 29.9-41.2
OA
L
VBN8AF VBN8F
SIZE L max.
L1
90 degree backshell with "A" style clamp Same as "AF" but includes a wire sealing grommet
16S 63 45 11.0 18 75 53 14.2 20 80 53 15.8 22 80 53 15.8 24 80 58 19 28 80 58 19 32 85 66 23.8 36 90 69 31.7 40 95 95 34.9
L1 max. OA
OA
L
VBN8APG-PGOXX VBN8RPG-PGOXX VBN8AM-MXXF VBN8RM-MXXF
SIZE L max. 16S 63 18 75
90 degree backshell with adapter with PG or Metric thread
20 80
22 80
24 80
28 80
32 85
36 90
40 95
Adapter
Dimensions shown in mm Specifications and dimensions subject to change
10
www.ittcannon.com
VEAM VBN
Electrical Contact Current Ratings
* MAXIMUM rated current 20 C Rated current 85 C * De-rated current **
Contact Size AWG
16 12 8
* single contact isolation ** grouped contacts
22A 41A 73A
15A 23A 46A
11,5A 20A 42A
Contact size
Contact resistance
Recommended current according to the temperature
250 245 (A)
16 12 8
2.5 m max. 1.3 m max. 0.9 m max.
200
CURRENT
* * * *
Insulation resistance = 5000 m In mated conditions Interfacial seal is in compression Minimum creepage distance = Minimum insulation distance in air: 12mm.
500 0
150 135
160 100
4
Electrical performance per NFF-61030
74
Rated voltage
Withstand voltage
50 41 22 8 0 20 40
60 100 25 12 16 80 TEMPERATURE 100 120 (C) 8
500 V.d.c. max 380 V.a.c. max.
3250 V.a.c. (rms) 3250 V.a.c. (rms)
15S 16S 15
10
60
Electrical performance per MIL-DTL-5015
Contact arrangement service rating
Service rating Operating Voltage DC (at sea level) Operating voltage AC (at sea level)
A D Dielectric strength (standard sea level conditions)
Service rating
700 V 1,250 V
500 V 900 V
Minimum flashover ac rms
* Test voltage ac rms
A D
* according to MIL-DTL-5015
2,800 V 3,600 V
2,000 V 2,800V
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
11
VEAM VBN
Insert Arrangements
Total Insert Arrangements Contacts 0 16S-1 18-19 20-4 20-7 20-15 22-14 22-23 24-10 28-21 32A-13 36-10 36A-22 40A-35 40A-60 40A-70 7 10 4 8 7 19 8 7 37 13 48 22 35 60 70 Contacts 8 12 Service Rating A A D * A A * A A D A D D A A
Alternate positions of insert
4
16 7 10
Front of male insert
Insert Arrangements
4 8 7 19 8 7 37 13 48 22 35 60 70
16S-1 18-19 20-4 20-7 20-15 22-14 22-23 24-10 28-21 32A-13 36-10 36A-22 40A-35 40A-60 40A-70
Degrees for alternate positions W X Y Z 80 280 120 240 45 110 250 80 110 250 280 80 280 80 280 35 250 80 280 80 110 250 280 65 130 230 295 80 125 235 280 80 110 250 280 70 130 230 290 80 110 250 280 80 110 250 280
* For service ratings, please see the related contact arrangement view.
Contact Arrangements
Full scale views - looking into front face of male insert
D A
F G A GG B D F A
F
G
A
C
B
E D
B C
E C
E D C
B
Insert Arrangement Number of Contacts Contact Size Service Rating
20-4 4 12 D
16S-1 7 16 A
20-15 7 12 A
24-10 7 8 A
10 1 2 13 3 4 7 6 5
A G H F E D C B
F E D G H C
A B B D H
A EF K J C G 9 8 12
11
Insert Arrangement Number of Contacts Contact Size Service Rating
20-7 8 16
A, B, H, G=D C, D, E, F=A
22-23 8 12 H=D, BAL=A
18-19 10 16 A
32A-13 13 12 D
Dimensions shown in mm Specifications and dimensions subject to change
12
www.ittcannon.com
VEAM VBN
Contact Arrangements
Full scale views - looking into front face of male insert
14 13 12 20 B 11 G R G P 10 D 9 8 18 6 10 9 8 19 17 11 24 23 22 6 22 6 4 12 25 32 31 21 21 15 3 13 26 33 35 30 20 14 27 34 29 19 4 16 15 28 17 18
A
Insert Arrangement Number of Contacts Contact Size Service Rating
22-14
36A-22 22 12 D
40A-35 35 12 D
19
16 A
24 23
27
25
27
1 28
2 3 29 4 30 50 63 51 52 34 53 35 54 10 36 37 12 14 13 11 8 9 31 32 33 7 5 6
25
26 27 4 28 45 56 46 6 29 5 43 55
A
A B G P V R D
D H O W P J Q
E
B G M
20 21
22 41 40 53 39
42
24 46 23 45 22 44
30 47 8
47 61 60 69 59 68 58 57 41 56 40 17 16 39 15 38 55 67 70 66
48 49 62
54
44
R
S a
T b
19 18 36 37 52
60
a
g
b j n p
d
e d
s
59 58 50
57
21 43 20 19
64 65
e n p
g q
h r
j s
17
48 49 34 10 9
16 15
36
18
14 13
Insert Arrangement Number of Contacts Contact Size Service Rating
28-21 37 16 A
36-10 48 16 A
40A-60 60 16 A
40A-70 70 16 A
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
13
VEAM VBN
Pin Crimp Contacts
L L
OC
OD
OA
Retention clip
OA
Retention clip
Figure 1
Wire Size mm2 AWG 0.5-0.75 1.0-2.0 2.5-3.0 0.5-0.75 1.0-2.0 2.5-3.0 2.5-3.0 0.5-0.75 1.0-2.0 4.0 6.0 AWG 8 3.0 4.0 6.0 10 20 16 12 20 16 14 14 20 16 12 10 8 14 12 10
Figure 2
Part Number
Size 16S 16S 16S 16 16 16 12 12 12 12 12 8 8 8 8 8
L 28.1 28.1 28.1 33.2 33.2 33.2 38.5 38.5 38.5 38.5 38.5 41.7 41.7 41.7 41.7 41.7
OA 1.58 1.58 1.58 1.58 1.58 1.58 2.38 2.38 2.38 2.38 2.38 3.60 3.60 3.60 3.60 3.60
OB 1.2 2.0 2.5 1.2 2.0 2.5 2.5 1.2 2.0 3.0 3.6 4.6 2.5 3.0 3.6 5.0
OC 2.6 2.9 3.8 2.6 2.9 3.8 3.8 2.6 3.8 4.8 4.8 6.8 3.8 4.8 4.8 7
OD 3.9 3.9 3.8 3.9 3.9 3.8 5.5 5.5 5.5 5.5 5.5 8.0 8.0 8.0 8.0 8.0
Cable O.D. maximum 3.8 3.8 3.8 3.8 3.8 3.8 5.4 5.4 5.4 5.4 5.4 7.8 7.8 7.8 7.8 7.8
OB
51513-16S-12 51513-16S-20 51513-16S-26 51513-16-12 51513-16-20 51513-16-26 51513-12 51513-12-12 51513-12-20 51513-12-30* 51513-12-38* 51513-8* 51513-8-26* 51513-8-30 51513-8-38 51513-8-50*
OC
Figure 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2
NOTES: 1.Materials: Body in copper alloy Retention clip in beryllium copper 2. Finish: Silver plating (add the suffix T9 to the part number) Gold plated (add the suffix T12 to the part number)
3. For different wire sizes (mm2), please consult factory. 4. The dimensions indicated are the maximum OD cable permitted due to the rear insert holes. 5. When grommets are used refer to page 25 for cable dimensions. * Contacts with wires not in according to NF F.
Dimensions shown in mm Specifications and dimensions subject to change
14
www.ittcannon.com
OD
OB
VEAM VBN
Socket Crimp Contacts
L L OA OC OB OD
OA
Retention clip Retention clip
OC
OB
OD
Figure 1
Figure 2
Part Number
Size 16S 16S 16S 16 16 16 12 12 12 12 12 8 8 8 8 8
Wire Size mm2 AWG 0.5-0.75 1.0-2.0 2.5-3.0 0.5-0.75 1.0-2.0 2.5-3.0 2.5-3.0 0.5-0.75 1.0-2.0 4.0 6.0 AWG 8 3.0 4.0 6.0 10 20 16 12 20 16 14 14 20 16 12 10 8 14 12 10
L 28.1 28.1 28.1 38.0 38.0 38.0 38.5 38.5 38.5 38.5 38.5 41.7 41.7 41.7 41.7 41.7
OA 1.65 1.65 1.65 1.65 1.65 1.65 2.48 2.48 2.48 2.48 2.48 3.70 3.70 3.70 3.70 3.70
OB 1.2 2.0 2.5 1.2 2.0 2.5 2.5 1.2 2.0 3.0 3.6 4.6 2.5 3.0 3.6 5.0
OC 2.6 2.9 3.8 2.6 2.9 3.8 3.8 2.5 3.8 4.8 4.8 6.8 3.8 4.8 4.8 7
OD 3.9 3.9 3.8 3.9 3.9 3.8 5.5 5.5 5.5 5.5 5.5 8.0 8.0 8.0 8.0 8.0
Cable O.D. maximum 3.8 3.8 3.8 3.8 3.8 3.8 5.4 5.4 5.4 5.4 5.4 7.8 7.8 7.8 7.8 7.8
Figure 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2
51511-16S-12 51511-16S-20 51511-16S-26 51511-16-12 51511-16-20 51511-16-26 51511-12 51511-12-12 51511-12-20 51511-12-30* 51511-12-38* 51511-8* 51511-8-26* 51511-8-30 51511-8-38 51511-8-50*
NOTES: 1.Materials: Body in copper alloy Contacts spring in beryllium copper, gold plated. Retention clip in beryllium copper 2. Finish: Silver plating (add the suffix T9 to the part number) Gold plated (add the suffix T12 to the part number)
3. For different wire sizes (mm2), please consult factory. 4. The dimensions indicated are the maximum OD cable permitted due to the rear insert holes. 5. When grommets are used refer to page 25 for cable dimensions. * Contacts with wires not in according to NF F.
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
15
VEAM VBN
Crimp, Insertion & Extraction Tools
Male Contact Contact Cable Part Number Size DIN mm2 AWG
51513-16S-12
16S
0.5 0.75 20 1 1.5 14 2.5/3 12 0.5 0.75 20 1 1.5 14 2.5/3 12 2.5/3 12 0.5 0.75 20 1 1.5 2 14 16 18 4 6 8 3 12
51513-16S-20 51513-16S-26 51513-16-12
16S 16S 16
51513-16-20 51513-16-26 51513-12 51513-12-12
16 16 12 12
51513-12-20
12
51513-12-30 51513-12-38 51513-8
12 12 8
51513-8-26
8
3 12 3 12
51513-8-30
8
4
51513-8-38
8
6
51513-8-50
8
10
Crimping Tool (note) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) MP-F80-VGE (H) HT45 (M) B50 (E) MP-F80-VGE (H) MP-F80-VGE (H) HT45 (M) HT45 (M) B50 (E) B50 (E) MP-F80-VGE (H) HT45 (M) B50 (E) MP-F80-VGE (H) HT45 (M) B50 (E) MP-F80-VGE (H) HT45 (M) B50 (E)
Crimping Die VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 44519-8T70 51589-52T70 51589-52T70 44519-425T70 44519-425T70 51589-32T70 51589-32T70 51589-32T70 51589-32T70 44519-44T70 51589-37T70 51589-37T70 44519-126T70 51589-37T70 51589-37T70 44519-8T70 51589-52T70 51589-52T70
Selector Number 3 4 3 5 6 6 7 8 3 4 3 5 6 6 7 8 7 7 3 4 3 7 8 8 8 7 7 8 8
Tool Position Green Green Green Green Green Green Green Green Blue Blue Blue Blue Blue Blue Blue Blue Red Red Red Red Red Red Red Red Red Red Red Red Red
Insertion Tool
Removal Tool ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN
Note: Manual= (M)
Hydraulic= (H)
Electrical= (E)
* = Consult Factory
Dimensions shown in mm Specifications and dimensions subject to change
16
www.ittcannon.com
VEAM VBN
Crimp, Insertion & Extraction Tools
Female Contact Contact Cable Part Number Size DIN mm2 AWG
51511-16S-12
16S
0.5 0.75 20 1 1.5/2 14 2.5/3 12 0.5 0.75 20 1 1.5/2 14 2.5/3 12 2.5/3 12 0.5 0.75 20 1 1.5 2 14 16 18 4 6 8 3 12
51511-16S-20 51511-16S-26 51511-16-12
16S 16S 16
51511-16-20 51511-16-26 51511-12 51511-12-12
16 16 12 12
51511-12-20
12
51511-12-30 51511-12-38 51511-8
12 12 8
51511-8-26
8
3 12 3 12
51511-8-30
8
4
51511-8-38
8
6
51511-8-50
8
10
Crimping Tool (note) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) VM8 or CT8N(M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) CT8N (M) MP-F80-VGE (H) HT45 (M) B50 (E) MP-F80-VGE (H) MP-F80-VGE (H) HT45 (M) HT45 (M) B50 (E) B50 (E) MP-F80-VGE (H) HT45 (M) B50 (E) MP-F80-VGE (H) HT45 (M) B50 (E) MP-F80-VGE (H) HT45 (M) B50 (E)
Crimping Die VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 VH435 44519-8T70 51589-52T70 51589-52T70 44519-425T70 44519-425T70 51589-32T70 51589-32T70 51589-32T70 51589-32T70 44519-44T70 51589-37T70 51589-37T70 44519-126T70 51589-37T70 51589-37T70 44519-8T70 51589-52T70 51589-52T70
Selector Number 3 4 3 5 6 6 7 8 3 4 3 5 6 6 7 8 7 7 3 4 3 7 8 8 8 7 7 8 8
Tool Position Green Green Green Green Green Green Green Green Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red Red
Insertion Tool
Removal Tool ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET16VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET12VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN ET8VBN
Note: Manual= (M)
Hydraulic= (H)
Electrical= (E)
* = Consult Factory
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
17
VEAM VBN
Maximum panel thickness
S Max. panel thickness with connectors type
Connector
16S 18 20 22 24 28 32 36 40
VBN6 7.2 7.5 7.5 7.5 7.5 8.2 7.5 7.5 7.5
MGPVBN6
Standard Plug Connector TYPE VBN6--
6.3 6.3 6.3 6.3 7 6.3 6.3 6.3
S
Rear Mounting Receptacle TYPE VBN3--
NOTE: The panel dimensions doesn't include the bolt head
Rear panel cut-out dimensions
Rubber Covered Plug Connector TYPE MGPVBN6-Short Coupling Nut OE 0.1
Shell Size
16S 18 20 22 24 28 32 36 40
C0.1
24.6 27 29.4 31.8 34.9 39.7 44.5 49.2 55.5
OD
28.3 31.7 35 38.3 41.8 47.6 54.3 60.5 66.4
for VBN3 series 4.5 4.5 4.5 4.5 4.5 5.5 5.5 5.5 5.5
C OD
Front panel cut-out dimensions
Shell Size
16S 18 20 22 24 28 32 36 40
OE 0.1 C0.1
24.6 27 29.4 31.8 34.9 39.7 44.5 49.2 55.5
OD
23 26.5 30 33 36 42 48.5 55 61
for VBN2 series 3.4 3.4 3.4 3.4 3.9 3.9 4.5 4.5 4.5
Dimensions shown in mm Specifications and dimensions subject to change
OE
18
www.ittcannon.com
VEAM VBN
Connector Dimensions
Receptacle VBN 2
A B C Insert retaining ring
front panel mounting
OD
E
Thread V
F
F E
SIZE 16S 18 20 22 24 28 32 36 40
A 40 50 50 50 50 50 50 50 50
B+0.4 -0 18.2 23.05 23.05 23.05 23.05 24.05 24.05 24.05 24.05
C 0.2 3.2 4 4 4 4 4 4 4 4
OD+0 -0.15 27.4 30.8 34.2 37.4 40.9 46.7 53.4 59.6 65.5
E 0.3 32.5 35.0 38.0 41.0 44.5 50.8 57.0 63.5 69.9
F 0.1 24.6 27.0 29.4 31.8 34.9 39.7 44.5 49.2 55.5
OG
OG 3.2 3.2 3.2 3.2 3.7 3.7 4.3 4.3 4.3
Thread V 7/8"-20 UNEF 1"-20 UNEF 1 1/8"-18 UNEF 1 1/4"-18 UNEF 1 3/8"-18 UNEF 1 5/8"-18 UNEF 1 7/8"-16 UN 2 1/16"-16 UN 2 5/16"-16 UN
Receptacle VBN 3
rear panel mounting
A B C Insert retaining ring
OD
E
Thread V
F
F E
SIZE 16S 18 20 22 24 28 32 36 40
A 40 50 50 50 50 50 50 50 50
B+0.4 -0 18.2 23.05 23.05 23.05 23.05 24.05 24.05 24.05 24.05
C 0.2 3.2 4 4 4 4 4 4 4 4
OD+0 -0.15 27.4 30.8 34.2 37.4 40.9 46.7 53.4 59.6 65.5
E 0.3 32.5 35.0 38.0 41.0 44.5 50.8 57.0 63.5 69.9
F 0.1 24.6 27.0 29.4 31.8 34.9 39.7 44.5 49.2 55.5
OG
OG M4 M4 M4 M4 M5 M5 M5 M5 M5
Thread V 7/8"-20 UNEF 1"-20 UNEF 1 1/8"-18 UNEF 1 1/4"-18 UNEF 1 3/8"-18 UNEF 1 5/8"-18 UNEF 1 7/8"-16 UN 2 1/16"-16 UN 2 5/16"-16 UN
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
19
VEAM VBN
Connector Dimensions
VBN 6
A Thread V
OB
Plug
Insert retaining ring
SIZE 16S 18 20 22 24 28 32 36 40
A 40 50 50 50 50 50 50 50 50
OB 32 36.5 39.9 43.1 46.6 53.4 60.1 66.3 72.5
Thread V 7/8"-20 UNEF 1"-20 UNEF 1 1/8"-18 UNEF 1 1/4"-18 UNEF 1 3/8"-18 UNEF 1 5/8"-18 UNEF 1 7/8"-16 UN 2 1/16"-16 UN 2 5/16"-16 UN
VBN 6GG
A
OB OC Thread V
Plug
Insert retaining ring
SIZE 16S 18 20 22 24 28 32 36 40
A 40 50 50 50 50 50 50 50 50
Thread V 7/8"-20 UNEF 1"-20 UNEF 1 1/8"-18 UNEF 1 1/4"-18 UNEF 1 3/8"-18 UNEF 1 5/8"-18 UNEF 1 7/8"-16 UN 2 1/16"-16 UN 2 5/16"-16 UN
OB 44 49 51.5 56 60 67 76 82.3 88
OC 38.9 43.5 46 50.5 54 61 67.6 74.3 80
Dimensions shown in mm Specifications and dimensions subject to change
20
www.ittcannon.com
VEAM VBN
Connector Components & Sub-Assemblies
Front Mounting Receptacle SHELL SIZE 16S 18 20 22 24 28 32 36 40
Ordering Part Number
VBN216STXX VBN218TXX VBN220TXX VBN222TXX VBN224TXX VBN228TXX VBN232TXX VBN236TXX VBN240TXX
Rear Mounting Receptacle SHELL SIZE 16S 18 20 22 24 28 32 36 40
Ordering Part Number
VBN316STXX VBN318TXX VBN320TXX VBN322TXX VBN324TXX VBN328TXX VBN332TXX VBN336TXX VBN340TXX
Note: 1. Receptacle shell assemblies are supplied with an insulator retaining ring 2. TXX= Plating suffix (consult factory)
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
21
VEAM VBN
Connector Components & Sub-Assemblies
Plug assembly without grounding finger SHELL SIZE 16S 18 20 22 24 28 32 36 40
Ordering Part Number
VBN616STXX VBN618TXX VBN620TXX VBN622TXX VBN624TXX VBN628TXX VBN632TXX VBN636TXX VBN640TXX
Plug assembly with grounding finger
SHELL SIZE 16S 18 20 22 24 28 32 36 40
Ordering Part Number
VBNG616STXX VBNG618TXX VBNG620TXX VBNG622TXX VBNG624TXX VBNG628TXX VBNG632TXX VBNG636TXX VBNG640TXX
Note: 1. Plug shell assemblies are supplied with an insulator retaining ring 2. TXX= Plating suffix (consult factory)
Dimensions shown in mm Specifications and dimensions subject to change
22
www.ittcannon.com
VEAM VBN
Connector Components & Sub-Assemblies
Female inserts
Shell Size 16S 18 20 20 20 22 22 24 28 32 36 36 40 40 40
Contact Arrangement 16S-1 18-19 20-4 20-7 20-15 22-14 22-23 24-10 28-21 32A-13 36-10 36A-22 40A-35 40A-60 40A-70
Part Number VBNI16S-1S VBNI18-19S VBNI20-4S VBNI20-7S VBNI20-15S VBNI22-14S VBNI22-23S VBNI24-10S VBNI28-21S VBNI32A-13S VBNI36-10S VBNI36A-22S VBNI40A-35S VBNI40A-60S VBNI40A-70S
Male inserts with front sealing gasket
Shell Size 16S 18 20 20 20 22 22 24 28 32 36 36 40 40 40
Contact Arrangement 16S-1 18-19 20-4 20-7 20-15 22-14 22-23 24-10 28-21 32A-13 36-10 36A-22 40A-35 40A-60 40A-70
Part Number VBNI16S-1P VBNI18-19P VBNI20-4P VBNI20-7P VBNI20-15P VBNI22-14P VBNI22-23P VBNI24-10P VBNI28-21P VBNI32A-13P VBNI36-10P VBNI36A-22P VBNI40A-35P VBNI40A-60P VBNI40A-70P
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
23
VEAM VBN
Connector Components & Sub-Assemblies
Grommets
Shell Size
16S 18 20 20 20 22 22 24 28 28 32 36 36 36 40 40 40 40 40
Contact Arrangement
16S-1 18-19 20-4 20-7 20-15 22-14 22-23 24-10 28-21 28-21 32A-13 36-10 36-10 36A-22 40A-35 40A-60 40A-60 40A-70 40A-70
O. D. Cable Range Vers. 1(3) Vers. 2(4)
1.0/3.0 1.0/3.0 2.5/4.5 1.0/3.2 2.5/4.5 1.0/3.0 2.5/4.5 4.0/6.0 0.8/1.8 1.8/3 2.5/4,5 0.8/1,8 1.8/3 2.5/4.5 2.5/4.5 0.8/1.8 1.8/3 1.0/2.0 2.0/3.0
Part Number
VBNZ16S-1(1)(2) VBNZ18-19 (1)(2) VBNZ20-4(1)(2) VBNZ20-7(1)(2) VBNZ20-15(1)(2) VBNZ22-14(1)(2) VBNZ22-23(1)(2) VBNZ24-10(1)(2) VBNZ28-21(1)(2) VBNZ28-21(1)(2) H VBNZ32A-13 (1)(2) VBNZ36-10 (1)(2) VBNZ36-10 (1)(2) H VBNZ36A-22 (1)(2) VBNZ40A-35 (1)(2) VBNZ40A-60(1)(2) VBNZ40A-60 (1)(2)H VBNZ40A-70 (1)(2) VBNZ40A-70 (1)(2)H
Note: (1) = For connector with male inserts suffix P must be added at the part number (2) = For connector with female inserts suffix S must be added at the part number (3) = Grommet to be used with classes R-F-CFZ-RV-RPG-RM-RSS (4) = Grommet to be used with classes R-F-CFZ-RV-RPG-RM-RSS The connector P/N will be ie: VBN6FH...
Dimensions shown in mm Specifications and dimensions subject to change
24
www.ittcannon.com
VEAM VBN
Common multi-purpose RV backshells
Short Straight Backshells With Common Thread
Used with grommet and compression ring
B E
OA
Thread F
Thread C
Ordering Part number Shell size OA max B 0.2 VBN-RV16STXX VBN-RV18TXX VBN-RV20TXX VBN-RV22TXX VBN-RV24TXX VBN-RV28TXX VBN-RV32TXX VBN-RV36TXX VBN-RV40TXX 16S 18 20 22 24 28 32 36 40 26 29.5 33 36 40 46 51.5 58 64.5 30.5 38 40 40 40 45 45 50 50
OD
Thread C 7/8"- 20 UNEF 1"- 20 UNEF 1 3/16"-18 UNEF 1 3/16"-18 UNEF 1 7/16"-18 UNEF 1 7/16"-18 UNEF 1 3/4"-18 UNS 2"-18 UNS 2 1/4"-16 UN
O D 0.2 14 17 21 21 26 26 32 37 45
E Min. 9.5 9.5 9.5 9.5 9.5 9.5 11 11.8 11.8
Thread F 7/8"- 20 UNEF 1"- 20 UNEF 1 1/8"-18 UNEF 1 1/4"-18 UNEF 1 3/8"-18 UNEF 1 5/8"-18 UNEF 1 7/8"-16 UN 2 1/16"-16 UN 2 5/16"-16 UN
Note: 1 - The backshells are supplied with gasket 2 - TXX = plating suffix: consult factory
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
25
VEAM VBN
Common multi-purpose backshells
Straight Backshells With Common Thread
Used with or without grommet and compression ring to make A, R, AF, F, CF and CFZ termination classes for 6 (straight plug) and 3 (receptacle) shell styles.
B OA E
Thread F
Thread C
Ordering Part number Shell size OA max B 0.2 VBN-R16STXX VBN-R18TXX VBN-R20TXX VBN-R22TXX VBN-R24TXX VBN-R28TXX VBN-R32TXX VBN-R36TXX VBN-R40TXX 16S 18 20 22 24 28 32 36 40 26 29.5 33 36 40 46 51.5 58 64.5 55 70 70 70 75 75 85 95 95
Thread C 7/8"- 20 UNEF 1"- 20 UNEF 1 3/16"-18 UNEF 1 3/16"-18 UNEF 1 7/16"-18 UNEF 1 7/16"-18 UNEF 1 3/4"-18 UNS 2"-18 UNS 2 1/4"-16 UN
OD
O D + 0.2-0 14 17 21 21 26 26 32 37 45
E Min. 9.5 9.5 9.5 9.5 9.5 9.5 11 11.8 11.8
Thread F 7/8"- 20 UNEF 1"- 20 UNEF 1 1/8"-18 UNEF 1 1/4"-18 UNEF 1 3/8"-18 UNEF 1 5/8"-18 UNEF 1 7/8"-16 UN 2 1/16"-16 UN 2 5/16"-16 UN
Note: 1 - The backshells are supplied with gasket 2 - TXX = plating suffix: consult factory
Dimensions shown in mm Specifications and dimensions subject to change
26
www.ittcannon.com
VEAM VBN
Common multi-purpose backshells
Straight Backshells With PG Thread
Used with or without grommet and compression ring to make APG and RPG termination classes for 6 (straight plug) and 3 (receptacle) shell styles.
L1 OD1
Thread F
Ordering Part Number VBN-PG9BL16STXX VBN-PG16BL18TXX VBN-PG21BL18TXX VBN-PG16BL20TXX VBN-PG29BL20TXX VBN-PG16BL22TXX VBN-PG21BL24TXX VBN-PG29BL24TXX VBN-PG36BL24TXX VBN-PG21BL28TXX VBN-PG29BL32TXX VBN-PG36BL32TXX VBN-PG36BL36TXX VBN-PG36BL40TXX VBN-PG42BL40TXX
Shell Size 16S 18 18 20 20 22 24 24 24 28 32 32 36 40 40
d1 max 26 29.5 34 33 43 36 40 43 54 46 51.5 54 58 64.5 64.5
L1 0,2 55 70 70 70 75 70 75 75 85 75 85 85 95 95 95
Thread B
Thread B PG9 PG16 PG21 PG16 PG29 PG16 PG21 PG29 PG36 PG21 PG29 PG36 PG36 PG36 PG42
Thread F 7/8"- 20 UNEF 1"- 20 UNEF 1"- 20 UNEF 1 1/8"-18 UNEF 1 1/8"-18 UNEF 1 1/4"-18 UNEF 1 3/8"-18 UNEF 1 3/8"-18 UNEF 1 3/8"-18 UNEF 1 5/8"-18 UNEF 1 7/8"-16 UN 1 7/8"-16 UN 2 1/16"-16 UN 2 5/16"-16 UN 2 5/16"-16 UN
Note: 1 - The backshells are supplied with gasket 2 - For different backshell sizes and PG thread termination, consult factory 3 - TXX = plating suffix: consult factory
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
27
VEAM VBN
Common multi-purpose backshells
Straight Backshells With Metric Thread
Used with or without grommet and compression ring to make AM and RM termination classes for 6 (straight plug) and 3 (receptacle) shell styles.
L1 OD1
Thread F
Ordering Part Number VBNM16BL16STXX VBN-M25BL18TXX VBN-M32BL18TXX VBN-M25BL20TXX VBN-M32BL20TXX VBN-M25BL22TXX VBN-M25BL24TXX VBN-M32BL24TXX VBN-M40BL24TXX VBN-M25BL28TXX VBN-M32BL32TXX VBN-M40BL32TXX VBN-M40BL36TXX VBN-M40BL40TXX VBN-M63BL40TXX
Shell Size 16S 18 18 20 20 22 24 24 24 28 32 32 36 40 40
d1 max 26 29.5 34 33 43 36 40 43 54 46 51.5 54 58 64.5 64.5
L1 0,2 55 70 70 70 75 70 75 75 85 75 85 85 95 95 95
Thread B
Thread B M16x1.5 M25x1.5 M32x1.5 M25x1.5 M32x1.5 M25x1.5 M25x1.5 M32x1.5 M40x1.5 M25x1.5 M32x1.5 M40x1.5 M40x1.5 M40x1.5 M63x1.5
Thread F 7/8"- 20 UNEF 1"- 20 UNEF 1"- 20 UNEF 1 1/8"-18 UNEF 1 1/8"-18 UNEF 1 1/4"-18 UNEF 1 3/8"-18 UNEF 1 3/8"-18 UNEF 1 3/8"-18 UNEF 1 5/8"-18 UNEF 1 7/8"-16 UN 1 7/8"-16 UN 2 1/16"-16 UN 2 5/16"-16 UN 2 5/16"-16 UN
Note: 1 - The backshells are supplied with gasket 1 - For different backshell sizes and METRIC thread termination, consult factory. 3 - TXX = plating suffix: consult factory
Dimensions shown in mm Specifications and dimensions subject to change
28
www.ittcannon.com
VEAM VBN
Backshells for shielded cable
(B)
Adapter for UNI4883 rubber tube Braid termination O-Ring
(G)
Metrc thread OPG thread
(H)
(D)
"C" type cable clamp
Backshell
(A)
(E)
"MGS" type cable clamp Suitable adapters
(A)
Termination Size
04 04 05 06 08 10 12 13
(D)
Cable O.D. Range
2.5-8 6.5-10 8-13.5 9.5-15.8 13-19 16-23.8 23.5-31.5 30-41
(E)
"MGS" Type Cable Clamp
02 03 04 05 06 07
(G)
Metric Thread
M12x1.5F M16x1.5F M20x1.5F M25x1.5F M25x1.5F M32x1.5F M40x1.5F M50(M60)x1.5F
(H)
PG Thread
PGO7 (PG9) PGO11 PGO13.5 PGO16 PGO21 PGO29 PGO36 PGO42 (PG48)
(B)
UNI4883 Rubber Tube
"C" Type Cable Clamp
-4C -6C -8C -10C -12C -16C -20C -28C
Different sizes available. Please consult factory.
Due to the various available options, for other dimensions and characteristics, please consult factory
How To Order
VBNG6SS (A) (B) (D) (E) (G) (H) FSxxxx 4C MGS02 M12F PG07 16S-1SNT100VO
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
29
VEAM VBN
Common multi-purpose backshells
90 backshells & adapters
Used with or without grommet and compression ring to make A,R, AF, F, CF and CFZ termination classes for 8 (90 plug) and 38 (90receptacle) shell styles.
A Oc
Thread F
Thread V
Ordering Part Number VBN-90R16STXX VBN-90R18TXX VBN-90R20TXX VBN-90R22TXX VBN-90R24TXX VBN-90R28TXX VBN-90R32TXX VBN-90R36TXX VBN-90R40TXX
Shell Size 16S 18 20 22 24 28 32 36 40
A Maximum 40 47 53 53 52 52 56 59 65
B Maximum 30 35 35 35 40 40 45 50 55
OC0.25 30 35 37.3 42 46 51 58 62 69
Thread F 7/8"-20 UNEF 1"-20 UNEF 1 1/8"-18 UNEF 1 1/4"-18 UNEF 1 3/8"-18 UNEF 1 5/8"-18 UNEF 1 7/8"-16 UN 2 1/16"-16 UN 2 5/16"-16 UN
Thread V 7/8"-20 UNEF 1"-20 UNEF 1 3/16"-18 UNEF 1 3/16"-18 UNEF 1 7/16"-18 UNEF 1 7/16"-18 UNEF 1 3/4"-18 UNS 2"-18 UNS 2 1/4"-16 UNS
Note: 1 - The backshells are supplied with gasket 2 - TXX = plating suffix: consult factory
Dimensions shown in mm Specifications and dimensions subject to change
30
www.ittcannon.com
B
VEAM VBN
Accessories
Adapters with metric thread "VBN-M--A---" series Usually used with 90 elbow connectors
B
O01
Ordering Part Number VBN-M16A16STXX VBN-M25A18TXX VBN-M32A18TXX VBN-M25A20TXX VBN-M32A20TXX VBN-M25A24TXX VBN-M32A24TXX VBN-M40A24TXX VBN-M32A32TXX VBN-M40A32TXX VBN-M40A36TXX VBN-M40A40TXX VBN-M63A40TXX
Thread F
Shell Size 16S 18 18 20/22 20/22 24/28 24/28 24/28 32 32 36 40 40
d 1 Max. 26 34 43 36.5 43 43 43 54 50 54 57.2 65 69
Thread B
L1 0.3 27 30 35 27 30 27 27 38 27 37 27 27 31
Thread B M16 x 1.5 M25 x 1.5 M32 x 1.5 M25 x 1.5 M32 x 1.5 M25 x 1.5 M32 x 1.5 M40 x 1.5 M32 x 1.5 M40 x 1.5 M40 x 1.5 M40 x 1.5 M63 x 1.5
Thread F 7/8" -20 UNEF 1" -20 UNEF 1" -20 UNEF 1 3/16"-18 UNEF 1 3/16"-18 UNEF 1 7/16"-18 UNEF 1 7/16"-18 UNEF 1 7/16"-18 UNEF 1 3/4"-18 UNS 1 3/4"-18 UNS 2" -18 UNS 2 1/4"-16 UN 2 1/4"-16 UN
Note: 1 - The adapters are supplied with internal gasket 2 - Txx = plating suffix: consult factory 3 - For different adapter sizes and metric thread termination: consult factory
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
31
VEAM VBN
Accessories
Adapters with PG thread "VBN-PG--A---" series Usually used with 90 elbow connectors
B
O01
Ordering Part Number VBN-PG9A16STXX VBN-PG16A18TXX VBN-PG21A18TXX VBN-PG16A20TXX VBN-PG29A20TXX VBN-PG21A24TXX VBN-PG29A24TXX VBN-PG36A24TXX VBN-PG29A32TXX VBN-PG36A32TXX VBN-PG36A36TXX VBN-PG36A40TXX VBN-PG42A40TXX
Thread F
Shell Size 16S 18 18 20/22 20/22 24/28 24/28 24/28 32 32 36 40 40
d 1 Max. 26 31 34 36.5 43 43 43 54 50 54 57.2 65 65
Thread B
L1 0.3 27 28.3 34 27 27 27 27 38 25.3 36.3 27 27 31
Thread B PG9 PG16 PG21 PG16 PG29 PG21 PG29 PG36 PG29 PG36 PG36 PG36 PG42
Thread F 7/8" -20 UNEF 1" -20 UNEF 1" -20 UNEF 1 3/16"-18 UNEF 1 3/16"-18 UNEF 1 7/16"-18 UNEF 1 7/16"-18 UNEF 1 7/16"-18 UNEF 1 3/4"-18 UNS 1 3/4"-18 UNS 2" -18 UNS 2 1/4"-16 UN 2 1/4"-16 UN
Note: 1 - The adapters are supplied with internal gasket 2 - Txx = plating suffix: consult factory 3 - For different adapter sizes and PG thread termination: consult factory
Dimensions shown in mm Specifications and dimensions subject to change
32
www.ittcannon.com
VEAM VBN
Accessories
Cable Clamp "VE3057-AB" Series
The concentric cable clamps ensure strain relief and centralized location of the cable. Used with bushing "49675-Series" in FR compound which is included with clamp. These clamps are supplied with AF and F termination classes.
Cable Clamp
G
D Q V
F
E
B
Ordering Part Number VE3057-8ABTXX VE3057-10ABTXX VE3057-12ABTXX VE3057-16ABTXX VE3057-20ABTXX VE3057-24ABTXX VE3057-28ABTXX
Used Used with with size Bushing 16-16S 18 20-22 24-28 32 36 40 49675-8 49675-10 49675-12 49675-16 49675-20 49675-24 49675-28
B 14.2 15.8 19 23.8 31.7 35 41.2
D 10.5 10.5 10.5 10.5 12.5 14 14
G 24 28.5 24 26 28 29.4 42.8
E-F-Q 28 33 35 43 51 58 65
Thread V 7/8"-20 UNEF 1"-20 UNEF 1 3/16"-18 UNEF 1 7/16"-18 UNEF 1 3/4"-18 UNS 2"-18 UNS 2 1/4"-16 UN
H 11.1 14.3 15.9 19.1 23.8 31.8 35
L 14.02 15.62 18.79 23.54 31.49 34.67 40.99
M 18.8 22.5 27.5 33.3 40.5 46.9 52.9
N 63.5 60.5 57.1 53.9 50.8 47.6 44.4
Rubber Bushing
H .063 [1.60 ]
N
M
L
Note: 1 - Txx = plating suffix: consult factory 2 - Ordering Part Number: VE3057--AB-- = Cable clamp with bushing included
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
33
VEAM VBN
Accessories
Cable Clamp "VE3057-C" Series
Waterproof cable clamps with mechanical strain relief, providing concentric clamping over a wide range of cable sizes. These clamps are supplied with CF and CFZ termination classes. Can be used with bushing "49674--Series" in FR compound to reduce the cable range. Bushing must be ordered separately.
G Cable Clamp
H
B
E
F
BUSHING
Brushing
A V
Ordering Part Number VE3057-8CTXX VE3057-10CTXX VE3057-12CTXX VE3057-18CTXX VE3057-20CTXX VE3057-24CTXX VE3057-28CTXX
Used with size 16-16S 18 20-22 24-28 32 36 40
B Thread A 7/8"-20 UNEF 1"-20 UNEF 1 3/16"-18 UNEF 1 7/16"-18 UNEF 1 3/4"-18 UNS 2"-18 UNS 2 1/4"-16 UN Open 13.48 15.87 19 23.8 31.75 35 41.25 Closed 8 9.6 11.3 15.5 23.4 23.4 29.9
E 0.4 25.4 28.5 33.3 39.6 47.6 53.9 60.3
F 0.2 28.1 31 37.3 42 54 57.1 63.5
G+0.5 -0 32.3 35.3 35.7 38.5 44.8 51.6 51.6
Thread V 6-32 UNC 6-32 UNC 8-32 UNC 8-32 UNC .250-20 UNC .250-20 UNC .250-20 UNC
Brushing Part Number 49674-16 49674-18 49674-20 49674-24 49674-32 49674-36 49674-40
H 11.1 11.1 13.7 19 23.8 28.5 31.7
Note: 1 - Txx = plating suffix: consult factory 2 - More telescopic bushings are available, consult factory Ordering Part Number VE3057-..C = Cable clamp without bushing. Ordering Part Number VE3057-..CB = Cable clamp + bushing.
Dimensions shown in mm Specifications and dimensions subject to change
34
www.ittcannon.com
VEAM VBN
Accessories
Adapters for rubber conduit "FS xxxx"
L
Thread OA SW
Connector Size 16S 18 18 18 20-22 20-22 20-22 24-28 24-28 24-28 24-28 24-28 24-28 24-28 24-28 32 32 32 32 32 32 36 36 36 40 40 40
Rubber Tube Size 20x15 17x12 20x15 25x20 20x15 25x20 26x18 23x18 25x20 27x22 29x24 33x25 33x28 37x32 38x33 33x28 38x33 40x30 40x35 42x36 50x40 38x33 40x35 50x40 37x32 42x36 50x40
Connector Size 16S 18 18 18 20-22 20-22 20-22 24-26 24-26 24-26 24-26 24-26 24-26 24-26 24-26 32 32 32 32 32 32 32 32 36 40 40 40
Thread 7/8"-20 UNEF 1"-20 UNEF 1"-20 UNEF 1"-20 UNEF 1"3/16"-18 UNEF 1"3/16"-18 UNEF 1"3/16"-18 UNEF 1"7/16"-18 UNEF 1"7/16"-18 UNEF 1"7/16"-18 UNEF 1"7/16"-18 UNEF 1"7/16"-18 UNEF 1"7/16"-18 UNEF 1"7/16"-18 UNEF 1"7/16"-18 UNEF 1"3/4"-18 UNS 1"3/4"-18 UNS 1"3/4"-18 UNS 1"3/4"-18 UNS 1"3/4"-18 UNS 1"3/4"-18 UNS 2"-18 UNS 2"-18 UNS 2"-18 UNS 2"1/4"-18 UNS 2"1/4"-18 UNS 2"1/4"-18 UNS
L 55 55 55 55 55 55 54 55 55 55 55 55 55 55 55 55 55 55 55 55 55 57 55 55 58 60 55
OA 13 10 13 18 13 18 16 16 18 20 22 23 26 30 31 26 31 28 33 34 38 31 33 38 30 34 38
SW 28 32 32 32 36 36 36 43 43 43 43 43 43 43 43 52 52 52 52 52 52 57 57 57 63 63 63
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
35
VEAM VBN
Insert wire hold plugs
51605 Series
B
OA
P/N 51605-16 51605-12 51605-8
OA 3.7 5.4 7.5
B 13.5 15.5 19.7
Dimensions shown in mm Specifications and dimensions subject to change
36
www.ittcannon.com
VEAM VBN
Plastic dummy male contacts
VBN-PDMC Series
To prevent mis-mating of like connectors, as shown previously in this catalog, the connector contact arrangement is rotated trough pre-determined angular positions. Each of these positions is identified by a single letter (N-W-X-Y-Z). For additional polarization, size 16 and 12 "plastic dummy contacts" are available. The "plastic dummy contacts" are longer than standard male contacts and can be installed in one or more contact cavities instead of standard male contacts, when empty contact cavities are available.
B
Ordering Part Number VBN-PDMC-16 VBN-PDMC-12
Size 16 12
OA 3.2 4.8
OA
B 32 36
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
37
VEAM VBN
Accessories
Metal Dust Cap "CIR-TF-Series"
Metal dust cap with chain, for receptacle. Also available with stainless steel rope (nylon covered) or nylon rope (consult factory).
Ordering Part Number CIR16STFTxx CIR18TFTxx CIR20TFTxx CIR22TFTxx CIR24TFTxx CIR28TFTxx CIR32TFTxx CIR36TFTxx CIR40TFTxx Used with size 16S 18 20 22 24 28 32 36 40 d1 Maximum 33 37.5 41 44 47.5 54.5 61 67.5 73 d2 +0.5 -0 4.4 4.4 4.4 4.4 4.4 5.6 5.6 5.6 5.6 I1 0.2 16 20.7 20.7 20.7 20.7 20.7 20.7 20.7 20.7 I2 Approximate 127 127 127 127 127 190 190 175 190
L1
D1
L2
D2
Metal Dust Cap "CIR-TV-Series"
Metal dust cap with chain, for receptacle. Also available with stainless steel rope (nylon covered) or nylon rope (consult factory).
L1
Ordering Part Number CIR16STVTxx CIR18TVTxx CIR20TVTxx CIR22TVTxx CIR24TVTxx CIR28TVTxx CIR32TVTxx CIR36TVTxx CIR40TVTxx
Used with size 16S 18 20 22 24 28 32 36 40
d1 Maximum 30 33.5 37 40 43.5 49.5 56 62.5 67.7
d2 +0.5 -0 4.4 4.4 4.8 4.8 4.8 4.8 5.6 5.6 5.6
I1 0.2 23.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5 31.5
I2 Approximate 127 127 140 140 140 190 190 190 190
D1
L2
D2
TXX= Plating suffix, consult factory.
Dimensions shown in mm Specifications and dimensions subject to change
38
www.ittcannon.com
VEAM VBN
Accessories
Panel sealing gasket
"N" Type gaskets assure waterproofing of front panel mounted connectors. Shell type 2 protection level: IP 67
C
A
A
C
"NS" type gasket with an imbedded metal screen for panel sealing and RFI shielding. Protection level: IP 65 (water stream)
B
D
Size 16-16S 18 20 22 24 28 32 36 40
A 0.2 24 27 29.4 31.8 34.9 39.7 44.5 49.2 55.5
B +1 -0 25.3 28.4 31.6 34.8 38 44.3 50.7 57 61.9
+04 -0
C 0.5 32.5 35 38 41 44.5 50.8 57 63.5 70
+04 -0
D +0.5 -0 4.2 4.2 4.2 4.2 4.2 5.1 5.1 5.1 5.602
"N" type (non-conductive) according to VG spec. VG95234 DA-16-1 VG95234 DA-18-1 VG95234 DA-20-1 VG95234 DA-22-1 VG95234 DA-24-1 VG95234 DA-28-1 VG95234 DA-32-1 VG95234 DA-36-1 16968
"NS" type (conductive) according to VG spec. VG95234 DA-16-2 VG95234 DA-18-2 VG95234 DA-20-2 VG95234 DA-22-2 VG95234 DA-24-2 VG95234 DA-28-2 VG95234 DA-32-2 VG95234 DA-36-2 16968/1
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
39
VEAM VBN
Accessories
Panel sealing gasket
"N" Type gaskets assure waterproofing of rear panel mounted connectors. Shell type 3 protection level: IP 67
C
A
A
C
"NS" type gasket with an imbedded metal screen for panel sealing and RFI shielding. Protection level: IP 65 (water stream)
B
D
Size 16-16S 18 20 22 24 28 32 36 40
A 0.2 24.6 27 29.4 31.8 34.9 39.7 44.5 49.2 55.5
B +3 -0 27.4 30.8 34.2 37.4 40.9 46.7 53.4 59.6 65.5
C 0.5 32.5 35 38 41 44.5 50.8 57 63.5 69.9
D +0.5 -0 4.2 4.2 4.2 4.2 4.2 5.1 5.1 5.1 5.1
"N" type (non-conductive) according to VG spec. VG95234 DH-16-1 VG95234 DH-18-1 VG95234 DH-20-1 VG95234 DH-22-1 VG95234 DH-24-1 VG95234 DH-28-1 VG95234 DH-32-1 VG95234 DH-36-1 46739-40
"NS" type (conductive) according to VG spec. VG95234 DH-16-2 VG95234 DH-18-2 VG95234 DH-20-2 VG95234 DH-22-2 VG95234 DH-24-2 VG95234 DH-28-2 VG95234 DH-32-2 VG95234 DH-36-2 46739-40-1
Dimensions shown in mm Specifications and dimensions subject to change
40
www.ittcannon.com
VEAM VBN
VBN 290 special series
box mounting receptacle with rear thread
65 48.5 8
Thread M75X15
110 90 O 8.5
O 80
33 PANEL 0-RING Dimmensions are in mm.
STRAIGHT PLUG CONNECTOR WITH BACKSHELL
Thread PG48
CH 75
160
O 101
CONTACTS ARRANGEMENTS
110 1 2 20 17 3
63 62 61 60 37 59 58 57 56 36 35 39 38 19 18 40
72 64 41 21 20 7 6 17 34 55 71 33 8
73 65 42 22 9 1 5 16 32 54 70
74 66 43 23 10 2 4 15 31 53 69 52 14 3 13 29 30 51 50 24 11 12 28 47 67 44 25 26 27 48 68 45 26 47
16 15 14
90
13 12
4 5
11 10
19 9
18 7 8
6
290-74 Number of contacts Contact size Service rating Ordering P/N: consult factory 74 74/16 A
290-20 20 16/12 ; 4/0 E
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
41
VEAM VBN
Crimp, insertion & extraction tools
MANUAL CRIMP TOOL VM8 / CT8N
REMOVAL TOOL
INSERTION TOOL
HYDRAULIC MP-F80-VGE
CRIMPING DIE 44519 & 51589
HYDRAULIC HT45
ELECTRICAL B50
Dimensions shown in mm Specifications and dimensions subject to change
42
www.ittcannon.com
VEAM VBN
Tool 2020 Cosmos
Ordering Part Number: PINZA 2020 COSMOS This tool helps the operators for mate and unmate plug connectors with the receptacle.
Dimensions shown in mm Specifications and dimensions subject to change
www.ittcannon.com
43
VEAM VBN
Product Safety Information
THIS NOTE MUST BE READ IN CONJUNCTION WITH THE PRODUCT DATA SHEET/CATALOG. FAILURE TO OBSERVE THE ADVICE IN THIS INFORMATION SHEET AND THE OPERATING CONDITIONS SPECIFIED IN THE PRODUCT DATA SHEET/ CATALOG COULD RESULT IN HAZARDOUS SITUATIONS. 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either: Copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD There is no fire hazard when the connector is correctly wired and used within the specified parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by separating mated connectors as this may cause arcing, ionization and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the product Data Sheet/Catalog are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires and leakage currents through carbonization of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3. HANDLING Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. 4. DISPOSAL Incineration of certain materials may release noxious or even toxic fumes. 5. APPLICATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages cannot be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undesired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the correct application tools as specified in the Data Sheet/Catalog. Do not permit untrained personnel to wire, assemble or tamper with connectors. For operation voltage please see appropriate national regulations. IMPORTANT GENERAL INFORMATION (i) Air and creepage paths/Operating voltage. The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and/or harnessing. (ii) Temperature All information given are temperature limits. The operation temperature depends on the individual application. (iii) Other important information Cannon continuously endeavors to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalog and data sheets. "Engineered for life" is a registered trademark of ITT Industries, (c)2005. All other trademarks or registered trademarks are property of their respective owners. All data subject to change without notice. Product Warranty ITT Cannon, a Division of ITT Industries, Inc. manufactures the highest quality products available in the marketplace; however these products are intended to be used in accordance with the specifications in this publication. Any use or application that deviates from the stated operating specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of Cannon. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to Cannon products. Except for obligations assumed by Cannon under this warranty, Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this publication is generally permitted, indicating the source. However, Cannon's prior consent must be obtained in all cases.
Dimensions shown in mm Specifications and dimensions subject to change
44
www.ittcannon.com
Connector Product Locations
With manufacturing facilities, sales representatives and distributors located worldwide, please visit our website at ww.ittcannon.com for a complete listing and to find the office nearest you.
GERMANY
Cannonstrasse 1 Weinstadt, 71384 phone: 49.7151.699.0 fax: 49.7151.699.217
HONG KONG
Unit 901 & 912, West Tower Shun Tak Center 168-200 Connaught Road Central phone: 852.2732.2720 fax: 852.2732.2919
ITALY
Via Statuto, 2 Arese, 20020 Milan phone: 39.2.935321 fax: 39.2.9385000
UK
Jays Close, Viables Estate Basingstoke, RG22 4BA phone: 44.1256.311200 fax: 44.1256.323356
USA
100 New Wood Road Watertown, CT 06795 phone: 1.860.274.9681 fax: 1.860.274.4963
"Engineered for life" is a registered trademark of ITT Industries.(c)2005. All other trademarks or registered trademarks are property of their respective owners. All data subject to change without notice.
www.ittcannon.com
VBN 05-Sept

▲Up To Search▲

Price & Availability of VBN2A1815PT39

	To Download VBN2A1815PT39 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .